Easy-to-use, fully waterproof, pH meter with large display. Floats. The modular design makes it extremely easy to change electrodes. The PH meter is equipped with automatic calibration with buffer recognition. The accuracy of the meter is 0,1 Ph. With automatic temperature compensation.



Art. No. HI0019

PHTEST10 Waterproof pHTestr10, calibration certificate included

Datasheet Request Quotation Links
User Manual FAQs References
Brochure Xtra Info Software
Accessories Terms of Delivery Standards

More Products


Powerful portable conductivity gauge with large measuring range. Equipped with Cond 6+ Conductivity Meter, electrode & Conductivity Carrying Kit (Includes 1 x 1413 uS, 12.88 mS, 84 uS KCl Standard Solution and 1x Deionised (Rinse) Water (60ml Each) The high accuracy and robust protective casing make this gauge ideal for use in the field and laboratory.


Easy to use, robust pH meter. Equipped with pH 5+ pH Meter with Single Junction pH Electrode, ATC Electrode & pH Carrying Kit Set (Includes 1 x pH 4.01, pH 7.00 Buffer Solutions, Storage Solution & 1 x Deionised (Rinse) Water (60 ml Each)  


The TABER ® Multi-Finger Scratch / Mar Tester is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage that can’t be classified as ordinary wear. The Multi-Finger Scratch / Mar Tester includes a pneumatically driven, move-able platform to which the test specimen is mounted. The platform moves in a linear fashion, and is operated by a control knob for single or multiple pass testing. An electronic timer displays the rate of speed, which can be controlled by reducing or increasing air pressure. A gantry supports five independent splined-fingers, which provide a constant, vertical load on interchangeable scratch tips. The gantry system includes a handle to raise and lower the arms. In addition, five support rests are incorporated to allow one or more arms to be moved to an upright, rest position such that the arm does not contact the specimen during testing. Individual weights of varying loads mount to the top of each arm finger to exert a standard force on the surface of the test material. Each instrument includes a weight set of 2N, 3N, 4N, 5N, 6N, 7N, 10N, 15N and 20N loads. Optional weights sets are also available consisting of either 4N, 8N, 9N, 13N or 8N, 13N, 18N weights. In additional, an optional weight of 25N or Precision Weight Kit to achieve 0.6N loads are available. Although flat specimens up to 22mm thick are normally tested, the 'free-floating' arms fingers enable you test evaluate slightly contoured specimens provided they are rigid or adequately supported. A spring-loaded specimen holder is standard and can be mounted to the end or side of the moveable platform for greater flexibility. To mount contoured specimens, two specimen hold-down clamps are provided. An optional 5mm spacer set is available to raise the gantry to accommodate specimens that are greater than 22mm thick.