DIGITAL USB MICROSCOPE WITH LCD SCREEN

Small, portable, inexpensive and easy microscope with LCD display that can be connected directly to a PC. Supplied with software for immediate inspection and measuring. The unique optical design combines the advantages of a USB-microscope digital camera to the precision optics of a microscope illuminated with LED lights.

With the 20X-200x magnification (500x by digital), you can determine the fine structure of surfaces or each other very visible object. This compact digital microscope is ideal for analyzing coating failures, imperfections, pre-treatment quality etc. The microscope can be used in direct contact to the surface or at larger distances.

The 8 integrated White Light LED's are adjustable in strength guaranteeing a clear view without causing reflections. Special software for editing and making videos comes with this USB microscope. With this software, you can determine the length, width, height and angle to the radius of the objects.

The USB microscope will also be supplied with a magnetic microscope holder, which gives the microscope a steady and straight position. Also enables the microscope to be used in a vertical position on Fe material due to its 3 very strong magnets.

Specifications

Image sensor : 5M high quality image sensor
Magnification : 20x-200x-500x
Resolutions : 12M, 8M, 5M, 3M, 1.3M, VGA
Lens : High quality microscopic lens
Display : 3 inch TFT panel, 4:3 ratio
Light sources : 8 LED’s with adjustable brightness
Power sources : Li-ion 3.7V / 800mAh battery
Working time : 4 hours (charging time 5 hours)
Frame rate : 30fps
Adaptor : Input: 100-240V, 50/60Hz – Output: 5V, 1A
OSD languages : English/German/French/Spanish/Italian/Portuguese/Japanese/Chinese
Software languages: English/German/French/Spanish
Measurement : by software
Size : 130x130x29mm 

 

ORDERING INFORMATION


Art. No. LD6184

Digital USB Microscope with display

Datasheet Request Quotation Links
User Manual FAQs References
Brochure Xtra Info Software
Accessories Terms of Delivery Standards

More Products

FITZ S ATLAS 2 OF COATING DEFECTS

The Fitz's Atlas 2 of coating defects is a reference manual with over 300 colour images, providing a clear and concise description of all problems that could occur, as well as their possible causes.The book is divided into the following sections: Welding faults Presurface conditions Coating defects Microscopy Marine fouling.

SURFACE ROUGHNESS GAUGE SJ-210 WITH SJ-TOOLS

Surface Roughness Meter SJ-210 offers a choice of 39 roughness parameters (according to DIN EN ISO, VDA, JIS, ANSI, MOTIF and freely selectable variables) and a probe geometry according to DIN EN ISO 3274: 2 ìm / 60 ° (recommended). The device has an incredibly simple intuitive menu navigation on a 2.4 "high resolution TFT color display. The screen is rotated electronically. The integrated drive unit can be removed or used. Surface Roughness Meter SJ-210 has an internal memory for ten measurements. This can be extended with external storage in the form of a Micro SD card. The SJ-210 Surface Roughness Meter provides interfaces for USB, RS232, SPC and connection for footswitch. Included are USB data analysis software tools and cable-SJ.

CALIBRATION STANDARDS FOR COATING THICKNESS GAUGES

Plastic foils and certified plastic shims. Available in the range of 12 to 20.000 micron. These foils can be applied to all ferrous- or non-ferrous metal substrates. Non-Certified Plastic Shims Non-Certified Plastic Shims (foils) provide a quick operational check of the instrument and they allow the user to perform practice measurements when placed over metal. Provide a quick operational check of the instrument by allowing the user to perform practice measurements Can be used to protect the probe when measuring on tacky, rough or hot surfaces Labeled in both Metric and Imperial units Certified Plastic Shims Certified Plastic Shims (foils) provide an economical alternative to coated metal plates. They have a reduced accuracy of ±2 µm (±0.08 mil). A coating thickness gage measures shim thickness when this shim is placed over a smooth metal surface (zero plate). Alternatively, they can be placed over an uncoated metal substrate. They are not suitable for use with magnetic pull-off gages. Each shim is packaged in their own plastic protective pouch Certificate of Calibration showing traceability to NIST is included with each shim or set of shims Certified and labeled in both Metric and Imperial units