CROSS CUT ADHESION TEST KIT CC3000

The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.

Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Knives and tape can be ordered as a spare as well

 

ORDERING INFORMATION


Art. No. SP1680

TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 1 mm
Acc. to ISO 2409 & ASTM D3359


Art. No. SP1681

TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 2 mm
acc. to ISO 2409 & ASTM D3359


Art. No. SP1682

TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 3 mm
Acc. to ISO 2409


Art. No. SP1683

TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1 mm
Acc. to ASTM D3359 <2009


Art. No. SP1684

TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1.5 mm
Acc. to ASTM D3359 <2009

More Products

ADHESION TEST PAT HANDY

The TQC Adhesion Test Pat Handy is an easy to use, lightweight hydraulic adhesion tester that applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle. The adhesion test head has self adjusting legs, which ensure that the pull off force is always applied 90º to the coating even on uneven substrate surfaces. The self adjusting feature results in extremely accurate and reproducable adhesion test results. The TQC Adhesion Test Pat Handy weighs only 1250 gram and comes complete with an A4-size carrying 80 mm height case.

CROSS CUT ADHESION TEST KIT (MASTER PAINT PLATE)

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross. Additional tools Wet film thickness gauge ranging from 50 microns up to 160 microns.  On the corners there is an edge grind checker for correct roundness of edges.  At the bottom is a wet film applicator ranging from 0 to 180 µm. The top edge provides a leveling test, an indication of the viscosity of the coating.  Delivery includes cutting tool and tape. Tapes for the cross cut adhesion test Tape For Adhesion Test according ISO 2409:2003 Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well. Standards NEN-EN-ISO-2409, ASTM D3359

CROSS CUT ADHESION TEST CC1000

The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates. The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife. Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.Knives and tape can be ordered as a spare as well