BAKER FILM APPLICATORS

Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different pre-defined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and are suitable for applying a host of different products onto flat and relatively solid substrates. Since it’s made out of high-grade stainless steel, the Baker Film Applicator will not be affected by acid or base elements.

 

ORDERING INFORMATION


Art. No. VF2145

TQC Baker applicator 60mm, 15/30/60/90µm, calibration certificate included


Art. No. VF2146

TQC Baker applicator 60mm, 30/60/90/120µm, calibration certificate included


Art. No. VF2147

TQC Baker applicator 60mm, 50/100/150/200µm, calibration certificate included


Art. No. VF1500

TQC Baker film applicator 80mm, 15/30/60/90µm, calibration certificate included


Art. No. VF1501

TQC Baker film applicator 80mm, 30/60/90/120µm, calibration certificate included


Art. No. VF1502

TQC Baker film applicator 80mm, 50/100/150/200µm, calibration certificate included


Art. No. VF1510

TQC Baker film applicator width 60mm, 4 gaps as desired
Max. gap size 3000µm, calibration certificate included


Art. No. VF1515

TQC Baker film applicator width 80mm, 4 gaps as desired
Max. gap size: 3000µm, calibration certificate included


Art. No. VF1560

TQC Baker film applicator width 80mm, 2x90µm / 2x150µm
(special diameter: 18mm instead of 27mm), calibration certificate included


Art. No. VF1520

TQC Baker film applicator width 100mm, 4 gaps as desired


Art. No. VF1521

TQC Baker film applicator width 100mm, gaps 15/30/60/90µm


Art. No. VF1522

TQC Baker film applicator width 100mm, gaps 30/60/90120µm


Art. No. VF1523

TQC Baker film applicator width 100mm, gaps 50/100/150/200µm


Art. No. VF1525

TQC Baker film applicator width 150mm, 4 gaps as desired
Max. gap size: 3000µm


Art. No. VF1526

TQC Baker film applicator width 150mm, gaps 15/30/60/90µm


Art. No. VF1527

TQC Baker film applicator width 150mm, gaps 30/60/90/120µm


Art. No. VF1528

TQC Baker film applicator width 150mm, gaps 50/100/150/200µm

Datasheet Request Quotation Links
User Manual FAQs References
Brochure Xtra Info Software
Accessories Terms of Delivery Standards

More Products

WIRE BAR COATER

TQC Wire bar applicator with a film width of 310 mm and available in ranges from 4 to 200 µm The Wire bar or spiral bar / drawdown rod applicator is ideal for applying a film on thin materials such as sheets or plastic. Also works on flexible substrates, and with motorized film applicators*. The high-grade stainless steel will not be affected by acid or base elements. Totale length: 440 mm Length application area: 320 mm Straightness: <50µm * TQC Wire bar coaters with starting art. code AB.... fit TQC Automatic Film Applicator Models sold from 2012 and on. If you have an older model TQC Automatic Film Applicator, another type of wire bar applicator has to be used. Information about this type of wire bar coater can be obtained under the Xtra Info section below.

AUTOMATIC FILM APPLICATORS

The TQC Motorised Automatic film applicator or drawdown machine provides a reliable basis to apply coating films and slurries to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the TQC Automatic film applicator these variable factors are being stabilised. Over the complete surface the film thickness is even. To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the TQC Motorised Automatic film applicator is a must have. Motorised Film Applicators are also used in the adhesives industry. AFA Features: Digital setting of speed, start position, stop position and stroke length . Wide speed range of 0-500 mm./ sec. Silent built-in vacuum pump with selected models with vacuum bed. Electronic vacuum area (A4/A3) selection eliminates the need for taping holes. Tool carrier height can be increased to allow coating of thicker panels / samples. Vacuum bed or glass bed can removed without tools for cleaning. Automatic spiral bar-coater retriever. Extensive safety measures through emergency stop and proximity sensors complies with all relevant standards. Drying time recorder option An optional drying time recording tool is available to convert the TQC automatic film applicator into a drying time recorder. The time range of the drying time recorder can be set digitally from 1 minute to 48 hours. The tool can be installed without any tools and can measure up to 8 channels in one run. Heated Vacuumbed The product is also available with an electrically heated vacuumbed. The temperature can be set digitally from ambient +5°C to ambient + 100°C . Heat-up time is short and temperature is uniform over the entire bed. Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils. All models can be used in combination with standard block type film applicators such as bird/baker models,sagging and levelling testers or spiral bar type film applicators (wire wound rod type).

COMPASS

Plastic needle compass equipped with revolving dial. The direction in which the compass needle points is referred to as magnetic north, making it extremely easy to determine the position of gardens, streets and buildings.