The TQC Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape, and the remaining paint on the wood with the illustrations classifying the damage from class 0 to 5. Delivery includes cutting tool and tape.

The Tape For Adhesion Test can be ordered separately as well.



Art. No. SP3100

TQC Adhesion Test Kit (HPK)

  • Dimensions: 100 x 55 mm.
  • Adhesion Test Scales
  • Wet film thickness test (50-160µm, in steps of 10µm).
  • Levelling test (1, 1.5 and 2 mm)
  • Film applicator (0-180µm, in steps of 20µm).
  • Edge radius 2, 3, 4 and 5 mm
Datasheet Request Quotation Links
User Manual FAQs References
Brochure Xtra Info Software
Accessories Terms of Delivery Standards

More Products


To fulfill the demand of many companies in the line of paint and their customers we composed the “Basic Inspection Kit”. In the field the need had arisen of one standard measuring set to perform all measurements and tests regarding painting. The kit is created to be used by executives of painting companies, such as foremen and divisional heads. The measuring set is also a very useful tool for customers like housing associations. The “Basic Inspection Kit” gives you profound information on the quality of old or existing coats of paint. The kit is also equipped with tools to perform measurements during application and delivery of a new paint job. The “Basic Inspection Kit” consists of the following tools: Moisture meter Digital thermo/hygrometer to measure the climate (temperature, humidity) during coating application. Compass Illuminated surface microscope. Useful tool to accurately check the surface and paint layer visually. Cutter knife. Stainless steel painter’s cutting tool with awl to muster old paint layers or rotten wood. PH-indicator paper to check the acidity of concrete walls and floors. Wedge for checking reverse-side tolerance and thickness of glass. Telescopic inspection mirror + lamp for visual quality control. Waterproof marker to mark and repair irregularities. MasterPaintPlate, multifunctional instrument to measure wet film thickness, cover of edges, thickness of glass, as well as providing an indication of the viscosity and adhesion of the coating. The Basic Inspection Kit is available with several different moisture meters. Tape can be ordered separately as well.


Non-destructive moisture detector for locating damp in laminated plastics such as polyester, and in wood. Equipped with sort rubber electrodes, which absolutely do not damage the surface. Three moisture ranges for detecting moisture in both fresh and salt water. Specially developed for osmosis-control and measuring or moisture before commencing with paint work on yachts.


The Metal sheet and coil coating cure profiler monitors the temperature profile of the coil strip at various points across its width as it is fed through the oven. Without stopping the line, the Metal sheet and coil coating cure profiler can be put on the moving coil. It is not possible to mount this system on vertical coil production facilities.The set consists of:- Special bracket- CurveX 3 Standard USB Oven logger - Insulation Box CX2003 - Energy absorber CX2014 for CX2003- 3x Wire- type probes - 3x Clamp Type Air probes- Ideal Finish Analysis software