Products
ADHESION TEST KIT (HPK)
The TQC Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimu...
ADHESION TEST PAT HANDY
The TQC Adhesion Test Pat Handy is an easy to use, lightweight hydraulic adhesion tester that applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle. The adhesion test...
ADHESION TESTER POSITEST AT-A (AT)
The new PosiTest AT-A Automatic Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates. The system is equipped with an electronically controlled hydraulic pump and measures according t...
CROSS CUT ADHESION TEST BASIC CUTTER
The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a ...
CROSS CUT ADHESION TEST CC1000
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pa...
CROSS CUT ADHESION TEST KIT (MASTER PAINT PLATE)
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, ...
CROSS CUT ADHESION TEST KIT CC2000
The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pa...
DOLLY DRILL FOR ADHESION TEST
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowin...
PRETREATMENT TEST KIT (PTK)
The TQC Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT. The strong double walled suitcase holds a...
PULL OFF ADHESION TESTER MODEL PAT GM01 GM04
This Precision Pull Off Adhesion Tester is a hydraulic tensile tester that works on the so-called pull off principle, and complies with the requirements of ISO 4624. The system consists of a hydraulic hand-pump equipped with a preci...
TAPE FOR ADHESION TEST (ISO 2409 1999)
The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross ...
TAPE FOR ADHESION TEST (ISO 2409 2003)
The TQC Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross...
TAPES FOR ADHESION-, DUST-, ROUGHNESS- and TEMPERATURE TESTS
These different TQC tapes are suitable for carrying out various tests such as the adhesion-cross cut test, the dust test, the surface roughness test with the so-called Testex films, coarse or X-coarse and tapes for curvex temperatur...
TEST PANELS
TQC Panels are available in a large variety of dimensions, materials and thicknesses. Use of TQC Test panels enhances reproducibility of physical and chemical tests. Each panel is equipped with a hole for hanging and handling. ...
