Products
ADHESION TEST KIT (HPK)
The TQC Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimu...
ADHESION TEST PAT HANDY
The TQC Adhesion Test Pat Handy is an easy to use, lightweight hydraulic adhesion tester that applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle. The adhesion test...
ADJUSTABLE CLAMP-TYPE PROBE FOR CURVEX (OBJECT 300°C)
Clamb type probe for measuring object temperature. Fits on both thin and thick materials up to 50 mm. The sensor tip is NiCr/Ni with Teflon fixation.
ALUMINUM MEASURING COMB
Rectangular promotion measuring comb with a range of 25 to 2032 µm. Made of top-quality, weather-resistant aluminum. Special printing possible with larger orders.
Aluminum transport case
Sturdy Aluminum transport case, ideal for composing specific measuring sets or to protect valuable equipment. With combination lock, pencil / paper folders and high density foam layer which can be cut to size Outer dimensions:...
ANALYTICAL BALANCE MARK 120A
The TQC Analytical Balance Mark 120A is a top quality weighing scale that combines elegance with highly reliable measuring performance. The accuracy and range perfectly matches the specifications of the machu test that is a mandator...
Automatic cupping tester
TQC Automatic Cupping Tester to perform a cupping (Erichsen / Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gr...
AUTOMATIC FILM APPLICATOR
The TQC Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pres...
AUTOMATIC KREBS VISCOMETER
The TQC Automatic Krebs Viscometer is widly used for determination of the viscosity according to Krebs KU, as used in the paint, coating and ink industry. The TQC Automatic Krebs Viscometer is equipped with a clear display and easy...
BAKER APPLICATORS
Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different pre-defined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and are suitable for applying a host of di...
BATTERIES
For valuable measuring equipment, we would recommend always using leakage proor Alkaline batteries such as Duracell Procell. A series of high-quality batteries for proressional applications.
BEND TEST CONICAL MANDREL
The TQC Bend Test Conical Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or deta...
BK DRYING TIME RECORDER
The BK 3 speed Drying Recorder (Beck Koller method) is used widely in the coatings industry throughout the world for several decades. A needle carrier holding six hemispherical ended needles travels the length of the six 305 x 25 mm...
BLUETOOTH USB DONGLE
TQC Bluetooth 2.0 USB dongle. For wireless communication between PC and for instance Notebook, PDA, Digital printer, Mobile phone, etc. Operating systems: Windows98, 98se, Me, 2000, XP, Vista. Transfer speed: 3Mb ps Receive /...
BRESLE KIT - CHLORIDE TEST KIT
The TQC Bresle Kit - Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a patch, distilled water and a conductivity gauge. The conductiv...
BRESLE METHOD
The bresle method according the ISO 8502-6 standard describes a method of extraction of soluble contaminants from a surface by means of adhesive TQC Bresle Patches which can be attached to any surface, regardless of its shape and or...
BRESLE PATCH FOR BRESLE KIT
The TQC Bresle Patch is used to test for surface contaminants, such as salt, which may cause major problems and increase maintenance costs for shipping, vessels, ballast tanks, oil and gas piping, industry buildings and steel struct...
BUCHHOLZ HARDNESS INDENTATION TEST
The TQC Buchholz Hardness Indentation Test provides a method for carrying out an indentation test on coatings complying with the ISO 2815-2003 standard. The TQC Buchholz Hardness Indentation Test consists of a calibrated slip-on wei...
CAISSON V1D6 NON-DESTRUCTIVE WOOD MOISTURE DETECTION METER
Non-destructive instrument for measuring moisture levels in wood. Measures up to a depth of approx. 20 mm. The instrument contains the calibration lines or 25 different types or wood, guaranteeing a high degree or accuracy. The sel...
CALIBRATION AND MAINTENANCE SOLUTION
TQC Calibration and Maintenance Solutions are essential for calibrating and maintaining the pH and/or conductivity gauge. A wide range of liquid measuring systems is available, in addition to acidity (pH), conductivity (S) and tempe...
CALIBRATION STANDARDS FOR COATING THICKNESS GAUGES
Plastic foils and plates. Certificates available upon request. Available in the range of 12 to 20.000 micron. These foils can be applied to all ferrous- or non-ferrous metal substrates.
CAPILLARY VISCOMETERS
Fungilab glass capillary viscometers allow a very accurate determination of viscosities using standard testing methods like ASTM, DIN and ISO. Each viscometer comes with a calibration certificate that includes the viscometer constan...
CARBIDE - METHOD HYGROMETER
High precision destructive S2000 measuring system for detecting moisture in concrete, sand cement and other bricky material. The water present in the sample reacts (chemically) with calcium carbide. This produces pressure in the ves...
CARRYING CASES - HIGH-QUALITY
Peli-Products offer a wide range of sturdy carrying cases made from hard-wearing, rust free plastic. The cases are air tight, waterproof and virtually indestructible. Each carrying case is equipped with a vacuum relief valve to open...
CLAMP-TYPE PROBES FOR CURVEX DATALOGGER (AIR 300°C)
TQC Clamp-type probes for measuring air temperature.
CLAMP-TYPE PROBES FOR CURVEX DATALOGGER (AIR 480C°)
Clamp-type probes to measure air temperature
CLAMP-TYPE PROBES FOR CURVEX DATALOGGER (OBJECT 300°C)
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer...
CLAMP-TYPE PROBES FOR CURVEX DATALOGGER (OBJECT 480°C)
Clamp-type probes to measure object temperature
COATING THICKNESS CALIBRATION STANDARDS (CERTIFIED)
Coated metal calibration standards consisting of a set of 4 calibration plates with epoxy coating on steel or aluminium.
COATING THICKNESS GAUGE
This handy and robust TQC coating thickness gauge is ideal for measurement tasks in various industries and paint applications. This compact meter allows measurement of painted objects, or other corrosion protective layer thicknesses...
COATING THICKNESS GAUGE FOR ALL SUBSTRATES
The Defelsko Positector 200 measures non-destructively a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites and more. Advanced models measure up to ...
COATING THICKNESS GAUGE POSITECTOR 6000
The TQC Coating Thickness Gauge Positector 6000 from Defelsko is a rugged, fully electronic coating thickness gauge that uses magnetic and eddy current principles to measure, accurately and quickly, coating thickness on both ferrous...
COLORCATCH2
The TQC Colorcatch2 allows professional painters to measure and match the coating color with the most popular color cards (NCS, RAL ...). On board integrated NCS and RAL cards are compared with the measured color and the correspondi...
COLORSHAPES
TQC Colorshapes are the perfect tool to assess visual characteristics of coatings such as colour, gloss and metallics. The convex and concave surfaces ant the smooth & sharp edges make the TQC ColorShape optimally suited for all ...
COLOUR MATCHING LAMP
The 3M Sun Gun Color Matching Light is an essential tool for paint shop professionals. Match paint color chips, identify paint flaws, and check for full coverage of newly sprayed paint. Eliminate the guesswork from paint refinishing...
COMBISCAN NON-DESTRUCTIVE WOOD MOISTURE DETECTION METER
CombiSCAN is the first pinless moisture meter from Lignomat. You can choose between two different measuring depths (7mm + 20mm) in only one meter! CombiSCAN can be set in 4 different languages: English, French, German and Italian. T...
COMBOTESTER PH EC TDS TEMPERATURE
This Combo waterproof tester offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large easy-to-r...
CONDUCTIVITY GAUGE ECOSCAN COND 6PLUS KIT
Powerful portable conductivity gauge with large measuring range. Equipped with cable electrode and integrated temperature probe for automatic temperature compensation. The high accuracy and robust protective casing make this gauge i...
CONDUCTIVITY METER
The TQC Conductivity Meter now measures a wider conductivity range from pure water to waste water and and comes with simultaneous temperature display, auto-ranging capabilities. Signature designs such as automatic temperature compen...
CORROSION TEST CABINETS
The all new Ascott salt spray chambers - one of the world's most modern and most versatile salt spray corrosion test systems - and with design, ergonomics and quality that's in a class of its own. Four model sizes: from the baby 12...
CROSS CUT ADHESION TEST BASIC CUTTER
The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a ...
CROSS CUT ADHESION TEST CC1000
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pa...
CROSS CUT ADHESION TEST KIT (MASTER PAINT PLATE)
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, ...
CROSS CUT ADHESION TEST KIT CC2000
The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pa...
CROSS CUT ADHESION TEST KIT CC3000
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pa...
CURVEX-2 OVEN LOGGER STANDARD KIT
Profiling an industrial powder coating oven starts right here with the CurveX-2 Oven Logger standard KIT. It contains all necessary items, just add the desired magnetic or clamp-type probes to make the oven logger KIT complete. T...
CYLINDRICAL BEND TEST 100MM INCL MANDREL SET
The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519. A test panel (max. size 150 x 100 mm) is bent over a cylindrical mandrel. The smaller the...
DEFELSKO 6000 PROBES FERRO NON-FERRO
Strong, wear resistant, ruby-tipped probes. Ferrous & Non-Ferrous probes for measuring non-magnetic coatings on a Ferrous surface or non-conductive coatings on a Non-Ferrous surface. The different Fe/NFe probes are available in ...
DEFELSKO 6000 PROBES MICRO FERRO NON-FERRO
Strong, wear resistant ruby tipped probes. Micro Ferrous & Non-Ferrous probes for measuring coatings on a Ferrous or Non-Ferrous surface. This small sized probes are specialy developed for measurments in small areas and pipe diamete...
Densimeter H-300S, Hildebrand
Densimeter to calculate the specific gravity.The density value is displayed automatically after the elapsed time.
DESIGN STAND FOR VISCOSITY CUP
The TQC Design Stand for Viscosity Cup is an adjustable in height stand equipped with a hinged cover plate, which enables quick measurements. Built-in spirit-level and adjustable feet. Suitable for all TQC Viscosity Cups according D...
DESTRUCTIVE COATING THICKNESS GAUGE SUPER PIG BASIC
The TQC Super PIG Basic is a simple, yet accurate destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and m...
DESTRUCTIVE COATING THICKNESS GAUGE SUPER-PIG
The TQC SP1000 SuperPIG is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and...
DEWMAG MAGNETIC THERMO - HYGROMETER
Dewmag Magnetic Thermo - Hygrometer , for use during application of protective coatings. Thermo-hygrometer containing a combination of a precision hygrometer and two bimetal-thermometers. The relative humidity and temperature sca...
DIGITAL LUX METER
TQC Handheld digital Lux meter with large display. Readings in Lux and Fc. Light can be quantified in many ways, i.e., Lux, Lumens, Footcandles, candle power, candelas, and so on. The two most common scales are Lux used in Europe, ...
DIGITAL RESISTIVITY METER FOR COATINGS
Digital instrument for the measurement of surface resistivity of coatings which are sprayed electrostatically. The probe is immersed in the coating and the measured value is displayed on screen. The probe is easy to clean. Measur...
DIGITAL STOPWATCH
Simple yet accurate digital TQC stopwatch, resolution to 1/100th of a second. Split times, built-in alarm. Clear display with large digits. Ultra flat and robust water- and shockproofdesign, complete with carrying cord. Indispensi...
DIGITAL THERMO HYGROMETER
Digital thermo hygrometer for indoor use, to be used as benchtop or wall model. Very large display (56 x 40 mm.), readable up to a distance of approximately 10 mtr. Memory for minimum and maximum values and humidity readings, ...
Digital USB microscope Full Kit
TQC has a new USB microscope with many accessories. This compact digital microscope is ideal for analyzing coating failures, imperfections, pre-treatment quality etc.. The microscope can be used in direct contact to the surface or a...
ELECTRONIC DATALOGGER SATO SK-L200TH II
Extremely compact instrument for recording temperature and air humidity. Complete with attached combiprobe (T/RV). A wire-combiprobe is optional. Directly programmable from the keypad or PC. Complete with attached combiprobe, RS232C...
ELPRO ECOLOG.NET LAN W-LAN DATALOGGER
Datalogger series Ecolog-Net are designed for recording temperature and relative humidity via a network. The data is stored in the internal memory and can be loaded to the PC via the LAN network. The system offers the highest data s...
ELPRO LIBERO PDF DATALOGGER
Independent temperature datalogger for evaluation without specific software. Libero is a handy, compact and very reliable transport and storage logger, with a temperature deviation of 0.5°C max. The buildt-in PDF-file creator autom...
EXPOSED JUNCTION WIRE PROBES FOR CURVEX DATALOGGER (250°C)
Exposed junction wire probes for measuring the air and/or surface temperature. Supplied as set of 6 pieces in plastic box, complete with 25 self adhesive pads.
EXTREME TEMPERATURE OVENS
Carbolite Ovens with a maximum range of 1800°C. Different sizes with an extensive range of options available.
FERRO NON-FERRO PROBES FOR QNIX 8500
Fe / NFe probes to measure non-ferromagnetic coatings on ferromagnetic substrate, for example measuring on steel- or iron-substrates and non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on non-ferro...
FERRO PROBES FOR QNIX 8500
Fe Probes to measure non-ferromagnetic coatings on ferromagnetic substrate, for example measuring on steel- or iron-substrates. QNix® 8500 sat - a world novelty The worldwide new, only thumb-size radio control probe allows safe...
FILM APPLICATOR (QUADRUPLEX)
The TQC Film Applicator (Quadruplex) has four application sides for applying paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is supplied with a guidance support for strai...
FILMAPPLICATOR FOR SAG AND LEVELLING
The TQC Sag and Levelling Film Applicator is a special film applicator with dual function. One side with 10 gaps from 75 to 300 micron to test the tendency to sag in relation to the film thickness. At the counter side 5 pairs of not...
GLASS FILM APPLICATION TABLE
A series of ultra-flat TQC Glass Film Application Tables, designed to draw down sample coatings on test charts with a high degree of reproducibility. The glass application tables are equipped with a strong clamp to hold down the ...
GLOSS-HAZE-DOI METER
The new Rhopoint IQ meter with 20/60/85° gloss and Haze/Rspec/DOI information. The Rhopoint IQ meter quantifies surface quality problems that are invisible to a standard glossmeter. - orange peel - raw material differentiation ...
GOURMET THERMOMETER
The TQC Gourmet Thermometer is a handy pocketsize thermometer with foldable stainless steel probe. Suitable for measurements in liquids and semisolids. Large clear display, ergonomic design and easy to clean. The instrument is equip...
GRINDOMETERS FINENESS OF GRIND GAUGES
The TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc.. Most TQC Grindometers have double grooves ...
HAIR HYGRO THERMOMETER
High precision industrial hair-hygrometer. Designed to be attached to a facade. Casing made of nickel-plated SPCC. Diameter 150mm. Measuring range RH: 20 to 100% Measuring range temperature: -10 to 50°C
HARDNESS TEST SP0010
The TQC Hardness Test SP0010 is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products. A tungsten carbide tip is drawn over the surface with a ...
HOTPLATE STIRRER WITH TEMPERATURE PROBE
TQC Hotplate Stirrer with external temperature probe, support rod and clamp. The ceramic coated hotplate of the TQC Hotplate Stirrer has a high chemical/Acid resistance. The Jog-Shuttle switch (Turn + Push) eases setting heat (up...
ILLUMINATED MICROSCOPE WITH GRADUATION SCALE
Illuminated microscope with graduation-scale. Both scale and lens have their own focussing dial, so the surface to assess is always clearly visible. The image you see will be inverted.
ILLUMINATED USB MICROSCOPE
The TQC Illuminated USB Microscope is equipped with an unique optical design that can focus on any profiled surface. The microscope combines a digital camera, precision optics and LED lighting in one device that fits in the palm of ...
IMMERSED BODY (PLUMMET)
TQC Immersed body (Plummet) (DIN EN ISO 2811-2) The Plummet method (Immersed body) is a universal instrument to determine the density of paints or related products. The method is based on 'Archimedes' principle. The upward force ...
IMPACT TEST
The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to th...
INFRARED INSPECTION LANTERN
A Robust, handheld rechargeable TQC Infrared Inspection Lantern powered by 80 Infrared led’s. The infrered inspection lantern is used to detect contaminations that react under IR-illumination and cannot be seen with naked eye. D...
INFRARED THERMOMETER POCKET SIZE
A pocket size infra red thermometer to measure surface temperature without making contact. The laser pointer identifies the target area easily. An illuminated display allows working in dark or poorly lit environments. Fast and si...
INFRARED THERMOMETER PROFESSIONAL
The TQC Infrared Thermometer Professional is designed to measure surface temperature under harsh industrial circumstances without the need of making contact with the object. The high quality optics (distance to spot size 50:1) makes...
INFRARED THERMOMETER STANDARD
A user-friendly TQC Infrared Thermometer Standard designed to measure surface temperature without making contact under harsh industrial circumstances. The laser pointer identifies the target area while rubber parts on the housing pr...
INOVA X5 UV-FLASHLIGHT
Although small in size (120x20mm) this flashlight offers a potent UV-beam. The LED’s are electronically controlled for uniform light output. The LED’s are energy efficient for longer battery life. The body is made of anodized al...
ISO 8501-1 2007 - THE RUST GRADE BOOK
In 2007 updated version of the standard measure for the visual evaluation of rust and purity levels of non-coated steel. Also known as the "Swedish steel blasting grades" SS 05 59 00 (Sa). Contains high-quality colour photographs fo...
ISO 8501-3 2006 - ILLUSTRATED EDITION
ISO8501-3:2006 describes preparation grades of welds, cut edges and other areas, on steel surfaces with imperfections. Such imperfections can become visible before and/or after an abrasive blast-cleaning process. The preparation ...
ISO 8501-4 2006 - ILLUSTRATED EDITION
ISO 8501-4:2006 is a hardback A5-format book in three languages (English, French and German) which specifies a series of preparation grades for steel surfaces after removal/partial removal of water-soluble contaminants, rust, previo...
ISO HANDBOOKS PAINTS & VARNISHES
A collection of more than 280 ISO International Standards covering the best methods for performance of paints and varnishes, as well as for the main groups of raw materials used in their manufacture. Standards for terminology and pr...
LED - ILLUMINATED SURFACE MICROSCOPE 25x
Portable surface microscope with 25x magnification. The 7.2 mm wide field of view is illuminated with 3 LED's that are dimmable and switchable. The glass optics are focusable. All this makes the portable surface microscope ideal to ...
LED FLASHLIGHT INOVA X1
Although small in size (100x20mm) this flashlight offers a potent beam of 2.0 Watt. The LED’s are electronically controlled for uniform light output. The LED’s are energy efficient for longer battery life. The body is made of an...
LIGHT2GO PORTABLE COLOUR ASSESSMENT LIGHT
Illumination is very important when it comes to assessment of coloured surfaces. Natural daylight never remains the same, whereas conventional lightsources don’t reflect the colours properly. Yet for a good assessment circumstance...
LIGNOMAT CALIBRATION BLOCK
Block with two-fixed resistively settings for testing Lignomat moisture detection meters. Can also be provided with a conversion certificate.
LUXURIOUS ILLUMINATED INSPECTION MIRROR
Very practical luxurious inspection mirror with illumination. Made of sturdy steel. Pocket size when shoved in. Dimensions: Shoved in: 155 x 85 x 17 mm Pushed out: 610 x 85 x 17 mm Mirror: 140 x 78 mm The mirror is 180° ...
MACHU SCRATCHING TOOL
TQC Machu Scratching Tool to perform a Machu test (corrosion test) with. Each tool is provided with a 1mm width cutter to cut the coating down to the metal, complying with ISO 17872. Two models are available: The TQC Machu Scratc...
MACHU TEST BATH
TQC Machu test, accelerated corrosion test on test panels and construction parts according to Qualicoat specifications. The test is made in a warm environment. To create this environment the test panels are placed in the plastic...
MAGNET PROBE FOR CURVEX DATALOGGER (OBJECT 300°C)
Magnet probes to measure object temperature, fitted with an ultra strong magnet, but still with a very low mass and size. The actual sensor is thermally isolated from the magnet in order not to affect the part's temperature. This se...
MAGNET PROBES FOR CURVEX DATALOGGER (AIR 300°C)
TQC Samarium Cobalt Magnet probes to measure air temperature in box ovens and conveyor ovens in the powder coating industry. Ideal for measuring the temperature profiles of the oven during the curing process.
MAXILIGNO WOOD MOISTURE DETECTION METER
The maxiLIGNO is part of a new generation of moisture meters. It is equipped with newest technology for perfect precision and easy handling. maxiLIGNO has an extra big illuminated display that shows the chosen wood species and tempe...
MICRO PROBE 500µM FOR QNIX 8500
Magnetic-inductive measurement probe with a measuring range of 0-500 µm for the most precise measurements of non-ferromagnetic coatings especially within the lower measuring range. Designed to measure thin, non-ferromagnetic me...
MICROPROCESSOR CONTROLLED WATER BATH
A high-quality water bath with MICROPROCESSOR technology and a temperature stability of ±0.2 °C. The working temperature range offers many application possibilities, e.g. routine laboratory applications, temperature control of sam...
MOISTURE DETERMINATION BALANCE
The TQC Moisture Determination Balance is an analytical balance equipped with drying chamber and halogen lamps. The moisture content is determined automatically by calculating the loss of weight during drying. The balance is equippe...
NON-FERRO PROBES FOR QNIX 8500
NFe Probe to measure non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on non-ferromagnetic and electrically conductive substrate, for example measuring on aluminium-, zinc-, brass- and certain stainle...
NOVEX STEREO MICROSCOPE RZ
These 0,65x - 4,5x zoom microscopes of exceptional quality for industrial applications, can achieve 2,6x up to 180x times magnification at working distances respectively from 225 to 25 mm. Please contact us for more information. ...
NOVO GLOSS GLOSS METER
Easy-to-use and accurate gloss meters for determining the gloss-level of flat coatings, plastics, paper, etc. Non statistical meters are based on the ‘Point and Click’ principle to perform a reading. Statistical glossmeters are ...
NOVO GLOSS TRIO GLOSSMETER
The Novo-Gloss Trio gloss meter is a fully featured, extremely easy to use instrument measuring the gloss of all flat surfaces. The 60º is the reference angle and is be used to measure any surface from matt to mirror finish. To...
OCTOPLEX FILM APPLICATOR
Multifunctional film applicator with 8 pre-defined thickness sides for applying paint-films of: 25, 50, 75, 100, 125, 150, 175, 200 mircon. Film width 60 mm. The high-grade stainless steel will not be affected by acid or base ...
OVEN LOGGER TEMPERATURE PROBE IDENTIFICATION KIT
The TQC Oven Logger Temperature Probe Identification KIT is available as a series tags numbered 1 to 6 and as series tags numbered 7 to 12. Suitable for any industrial powder coating oven also at high temperatures.
PALMTOP SALINITY METER ECOSCAN SALT 6
EcoScan Salt 6 for quick, accurate salinity measurements in laboratories, field and schools. The instrument has a lot of unique features like push-button Calibration with ±1% full scale accuracy, Automatic Temperature Compensation ...
PENCIL HARDNESS TEST ACC. WOLFF WILBORN
The TQC Pencil Hardness Test according Wolff Wilborn provides in a simple method to test the scratch hardness of coatings. In this test, pencils in a range of 6B to 8H hardness-grade are used. The pencil is moved scratching over the...
PENCILS FOR HARDNESS TEST ACCORDING WOLFF WILBORN
Koh-I-Noor 1500 set of 20 pencils in an aluminum case to use with the Wolff Wilborn Hardness Test. Pencils ranging from 8b to 10H (8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H, 10H) The ISO 15184 standa...
PENDULUM HARDNESS TESTER
The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillatin...
PH INDICATOR PAPER UNIVERSAL - PH 1-14
Indicator paper on a roll for acid and base (alkaline) test. - fast response time within a minute - easy to read, accurate color charts - high contrast for easy color chart comparisons
PH-METER PH 5PLUS
Easy to use, robust pH meters. Equipped with automatic temperature compensation, buffer recognition and calibration memory. Splashproor key pad. Rubber protecting case included as standard.
PINHOLE DETECTOR - LOW VOLTAGE
The TQC Low Voltage Pinhole Detector or porosity tester utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors - namely, a high quality, low voltage detector with similar accessories t...
PLASTIC WET FILM COMB
The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or c...
PROTECTIVE CASES - LOW COST
A series of sturdy plastic cases equipped with different layers of high-density foam. The foam can be cut to size. Ideal for composing specific measuring sets or to protect valuable equipment.
PYKNOMETER ISO 2811 DIN 53 217 ASTM D 1475
Pyknometers for determining the specific gravity or density (or weight per gallon wpg)of coatings , pastes or similar liquids. Density is defined as weight per unit volume at a specified temperature. Available in anodised aluminiu...
QNIX 4200 COATING THICKNESS GAUGE FERRO
Handy and robust coating thickness gauge. QNix® 4200 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thickne...
QNIX 4500 COATING THICKNESS GAUGE FERRO NON-FERRO
QNix® 4500 - a handy, fast and robust coating thickness gauge. QNix® 4500 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and anti -...
QNIX 8500 COATING THICKNESS GAUGE FERRO NON-FERRO
QNix® 8500: A modular precision measuring system for maximum flexibility. In close collaboration with practitioners from the handwork, industry and service sectors a new generation of a modular measuring system resulted that belong...
RAL-K7 COLOUR FAN
Easy-to-use fan containing all 210 original RAL colours. Laminated version, making it suitable for use in the field.
RESISTIVITY GAUGE FOR COATINGS
Simple instrument for measuring the surface resistivity of electrostatically sprayed coatings. The probe is easy to clean and is immersed in the coating. The measured value is recorded on an analogue scale.
RING STAND FOR VISCOSITY CUP
The TQC Ring Stand for Viscosity Cup is a ring stand made of galvanized steel, suitable for all TQC Viscosity Cups according DIN, ISO and ASTM.
RING-TYPE PROBES FOR CURVEX DATALOGGER (OBJECT 1000°C)
Ring-type probes to measure object temperature
RING-TYPE PROBES FOR CURVEX DATALOGGERS (OBJECT 300°C)
TQC Ring-type surface probes to measure object temperature. With aluminium ring at the tip for fast response. For use with Curvex oven data logger for powder coating ovens. Mandatory for Qualicoat, GSB or QIB accredited powder coat...
RING-TYPE PROBES FOR CURVEX DATALOGGERS (OBJECT 480°C)
Ring-type probes to measure air temperature
ROBUST SURFACE MICROSCOPE
Robust alumimum surface microscope with separate adjustable illumination, focus ring, adjustable scale (mm, inch) and rubber eye cup. Available with 20 x, 60 x and 100 x magnification. Ideal for inspecting, tracking, and measuring...
Rotational viscometer VR3000
TQC rotational viscosity meter VR3000 V1 and V2 are both accurate rotation viscosity meters (Brookfield method) with all the comforts and easy of being according to all used standards. The availability of both a version with (V2) an...
Rotational Viscosimeter DV1400
TQC Rotational Viscometer according to Brookfield Method, allows quick determination of viscosity in laboratory, research centres, and during production. The intuitive, easy functionality. light weight, and the fact they are battery...
SALT SPRAY CORROSION TEST CABINET
The TQC Salt Spray Corrosion Test Cabinet is a reliable test chamber to perform accelerated corrosion tests on a wide variety of materials such as paints, metals, electronics etc. Simplicity of operation is guaranteed by an easy to ...
SET OF 14 MANDRELS FOR TQC CYL BEND TEST 100MM
The TQC Bend Test Cylindrical Mandrels consists of 14 mandrels for the TQC Bend Test Cylindrical, a bend test for determining the elasticity of coatings in accordance with ISO 1519. A test panel (max. size 150x100mm) is bent over a ...
SHORE HARDNESS GAUGE DIN 53505 ISO 868 ASTM D2240
The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the highest measured result. Delivery i...
SHORE HARDNESS GAUGE TEST STAND
The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture. With this test stand h...
SHORE HARDNESS TESTBLOCK KIT
The TQC Shore Hardness Testblock Kit with different values of hardness. As a reference check it will indicate if a durometer is operating within tolerances. The indivual test blocks are provided with serial numbers to guarentee inco...
SLING PSYCHROMETER
Bacharach type sling Psychrometer for indicating percent relative humidity on the basis of the wet bulb-dry bulb thermometer principle. The plastic case of the instrument is equipped with conversion scale for calculating the percent...
STEEL SURFACE ROUGHNESS COMPARATOR
Comparison standard according to ISO 8503 part 1 made of quality steel. Indicates the surface condition of blasted steel according to ISO 8503 in grades of fine, medium, and coarse.
SUPERPIG CAMERA ADAPTER
Special camera adapter to record destructive dry film thickness measurements of TQC SuperPIG (all grey models) with a digital compact camera. The pictures can be used for detailed reporting or as evidence. The SuperPig camera ad...
SURFACE MICROSCOPE
Surface microscope in pocket size in hard leather case. Ideal for inspecting, tracking, and measuring small cracks etc. Can be placed directly on the surface, with adjustable focus and scale division in the lens. Height: 45 mm Dia...
SURFACE MICROSCOPE WITH ILLUMINATION
TQC Illuminated hand-held surface microscope with a built-in lamp for surface inspections. Enlarges 40x, and is equipped with a focus wheel to adjust the sharpness, a measuring reticle and a rotatable direct light source. Delivery i...
TABER ABRASER
Taber Abrasion is used to determine relative resistance to abrasion defined as ‘the ability of a material to withstand mechanical damage’ such as rubbing, scraping or erosion. The Taber Abraser is an industry standard used i...
TABER LINEAR ABRASER
The TABER® Linear Abraser is designed to test virtually any size or shape specimen, the Linear Abraser is ideal for material properties of contoured surfaces and finished products. Initially developed to evaluate wear resistanc...
TABER SHEAR SCRATCH TESTER
Motorised instrument for testing the resistance to scratching of materials. A sample plate rotates while a conical diamond point is pressed on the sample plate. The relation between the depth of the scratch and the applied (pre-set)...
TABER STIFFNESS TESTER
The TABER® Stiffness Tester is used to assess material stiffness and material resiliency. The TABER® Stiffness Tester provides accurate test measurements to ±1.0% for specimens with a thickness of 0.004" to 0.219". With the ...
TAPE FOR ADHESION TEST (ISO 2409 1999)
The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross ...
TAPE FOR ADHESION TEST (ISO 2409 2003)
The TQC Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross...
TAPES FOR ADHESION-, DUST-, ROUGHNESS- and TEMPERATURE TESTS
These different TQC tapes are suitable for carrying out various tests such as the adhesion-cross cut test, the dust test, the surface roughness test with the so-called Testex films, coarse or X-coarse and tapes for curvex temperatur...
TELESCOPIC INSPECTION MIRROR - ROUND
The TQC Telescopic Inspection Mirror with high quality chrome shaft is originally manufactured for inspection of aircrafts. These inspection mirrors are perfect for inspection of the invisible, hard to reach, behind view spots and a...
TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP
The TQC Temperature Control Jacket for Viscosity Cup is a double jacketed casing of anodised aluminium with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids. Supplied wit...
TEMPERATURE INDICATION STICKERS
Are available in different series with 1, 5, 6, or 8 temperatures per sticker. The indicators are irreversible: the highest measured temperature always remains visible, for many months. This makes the indication stickers ideal for c...
TEMPERATURE PROBES
Probe can be connected to instruments suited for changeable probes (type ‘K’) using a plug connection. The probe is provided with a firm hand-grip and a one meter curled cable. Can also be manufactured according to customer spec...
TESTEX REPLICA TAPE, PRESS O-FILM
Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thi...
THERMAPEN Foodthermometer
A handy pocketsize thermometer with foldable stainless steel probe. Large clear display.
THERMO-HYGROMETER
The TQC Thermo hygrometer is a simple hand-held digital thermo/hygrometer. Temperature and air humidity are displayed simultaneously. Equipped with MIN/MAX memory, °C/°F selection, HOLD function and dewpoint indication. The TQ...
THERMOCOUPLE EXTENSION CABLE
Flexible extension cord for type "K' temperature probes using a thermocouple and mini-connectors. Available lengts 1.5 or 5 meter. Delivered complete with male/female connections. Cables can also be manufactered according to cust...
THERMOCOUPLE SELECTOR
Using this device, 6 different thermocouples can be fitted on one type 'K' thermometer. Equipped with a selection switch and standard model mini-connector. Fits every standard model 'K' type thermocouple meter.
THERMOMETER TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type 'K' thermocouple probes. The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE...
TRIPOD STAND FOR VISCOSITY CUP
The TQC Tripod Stand for Viscosity Cup is a stand that is easy to level with the adjustable feet of the unit and the built-in spirit level. The ring is made of stainless steel, the legs are made of stainless steel and the feet PVC....
USB DATA LOGGER FOR TEMPERATURE AND RH
USB data logger for temperature and relative humidity. The USB data logger has a memory for 32.000 readings (16000 temperature- and 16000 humidity readings), a dewpoint indication, a user-selectable alarm. The measuring interval can...
UV INSPECTION LANTERN
Robust, handheld rechargeable inspection spotlight powered by 7 high-flux UV LED’s, with a total emission power of over 2200mW. TQC UV inspection lantern is used to detect contaminations that react under UV-illumination and can...
VISCOSITY CUP ASTM D1084 D4212 IMMERSION ZAHN
The TQC Viscosity Cup ASTM D1084 D4212 Immersion Zahn is a range of stainless steel viscosity cups with fixed stainless steel inner cavity nozzle and handle. Ideal for measuring coatings and other fluids during application or produc...
VISCOSITY CUP ASTM D1200 FORD
The TQC Viscosity Cup ASTM D1200 Ford is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). the viscosity cups are suitable for laboratory use with a stand. Widl...
VISCOSITY CUP ASTM D1200 IMMERSION FORD
The TQC Viscosity Cup Immersion Ford is a range of titanium anodized aluminum or stainless steel viscosity cups with stainless steel inner cavity fixed nozzle and handle. Ideal for measuring coatings and other fluids during applicat...
VISCOSITY CUP DIN 53211
The TQC Viscosity Cup DIN 53211 consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle. The TQC Viscosity Cup DIN 53211 is available in ti...
VISCOSITY CUP DIN 53211 IMMERSION
The TQC Viscosity Cup DIN 53211 Immersion is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity) and handle. Inner dimensions similar to DIN 53211. Ideal for measu...
VISCOSITY CUP DIN 53211 WITH INTERCHANGEABLE NOZZLE
The TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle. The TQC Viscosity Cup ...
VISCOSITY CUP ISO 2431
The TQC Viscosity Cup ISO 2431 is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). Laboratory type, to be used with stand, to measure the viscosity of lacquers...
VISCOSITY CUP ISO 2431 IMMERSION
The TQC Viscosity Cup ISO 2431 Immersion is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity) and handle. Inner dimensions similar to ISO 2431. Ideal for measuri...
WATERPROOF THERMOMETER
Sato SK-1250MCIII + K100WIIIS sensor, waterproof thermometer. Equipped with min/max. memory and "hold" option. Ideal for use in the food industry.
WET FILM THICKNESS GAUGE STAINLESS STEEL
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several differen...
WET FILM THICKNESS WHEEL
Specially by TQC developed instrument for use on wet lacquers, paint and coil coated surfaces. Equipped with a precision roller-bearing for smooth rolling over the surface . The wheel has three rims, the inner rim being eccentric t...
WIRE-TYPE PROBES FOR CURVEX DATALOGGER (1000°C)
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
WIRE-TYPE PROBES FOR CURVEX DATALOGGER (300°C)
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
WIRE-TYPE PROBES FOR CURVEX DATALOGGER (480°C)
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
