Company Products News Service Contact
HOTPLATE STIRRER WITH TEMPERATURE PROBE

More Photos

hotplate-stirrer-with-temperature-probe-vf8800-02.jpg hotplate-stirrer-with-temperature-probe-vf8800-03.jpg hotplate-stirrer-with-temperature-probe-vf8800-04.jpg hotplate-stirrer-with-temperature-probe-vf8800-01.jpg

20-dispersion.png

More applications

HOTPLATE STIRRER WITH TEMPERATURE PROBE

TQC Hotplate Stirrer with external temperature probe, support rod and clamp.

The ceramic coated hotplate of the TQC Hotplate Stirrer has a high chemical/Acid resistance. The Jog-Shuttle switch (Turn + Push) eases setting heat (up to 380°C), stirring speed (80-1500 RPM) and time. The illuminated display shows these values, and they can be stored in the memory of the TQC Hotplate Stirrer. The temperature is adjustable in 0,5°C steps., stirring speed in 5 RPM steps. TQC Hotplate Stirrer has a capacity of 20 liter.

The end of a run or probe failure is indicated with an acoustic signal. The TQC Hotplate Stirrer is protected against overheating and overload.

VF8800

TQC Hotplate Stirrer with external temperature probe, support rod and clamp.

Datasheet Request Quotation Links
User Manual FAQs References
Brochure Xtra Info Software
Accessories Terms of Delivery Standards
Video

More Products

VISCOSITY CUP ISO 2431

VISCOSITY CUP ISO 2431

The TQC Viscosity Cup ISO 2431 is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). Laboratory type, to be used with stand, to measure the viscosity of lacquers, paint and other liquids. According to DIN, EN, ISO 2431.

More

AUTOMATIC KREBS VISCOMETER

AUTOMATIC KREBS VISCOMETER

The TQC Automatic Krebs Viscometer is widly used for determination of the viscosity according to Krebs KU, as used in the paint, coating and ink industry. The TQC Automatic Krebs Viscometer is equipped with a clear display and easy user interface that ensure highly reproducible results in fully automatic measuring cycles. The TQC Automatic Krebs Viscosity can be used automatic and manually. In both modes waiting and measuring time can be preset by the user between 0 and 99 seconds. Results can be printed by means of a thermal printer and serial communication RS232. The meter is both highly accurate and simple to use, making it suitable for research as well as production environment.

More

MACHU SCRATCHING TOOL

MACHU SCRATCHING TOOL

TQC Machu Scratching Tool to perform a Machu test (corrosion test) with. Each tool is provided with a 1mm width cutter to cut the coating down to the metal, complying with ISO 17872. Two models are available: The TQC Machu Scratching Tool Basic is based on the CC2000 model. with a self positioning knife bracket to expose the substrate with a perpendicular cut through the coating. The TQC Machu Scratching Tool Professional is based on the CC3000 model with adjustable cutting depth and two ball bearings to guide the cut. This guarantees reproducible results. Mandatory test in Qualicoat and QIB accredited laboratories.

More